En magnetventil är en elektromagnetiskt kontrollerad industriutrustning . Det är en automatiserad baskomponent som används för att styra vätskor . Det tillhör ett ställdon . Den pneumatiska solenoidventilen är en av dem . Det blockerar eller lutar sig av olje av den pneumatiska solenoidventil body. The oil inlet hole is normally open, the hydraulic oil will enter different oil discharge pipes, and then the piston of the oil cylinder is pushed by the oil pressure of the pneumatic solenoid valve so that the current of the electromagnet that controls the pneumatic solenoid valve is controlled. Mechanical movement of the entire solenoid ventil .
Drag
Det kan fungera normalt i ett vakuum, negativt tryck och nolltryck, men diametern överstiger i allmänhet inte 25 mm .
Det kan också fungera under nolltrycksskillnad eller vakuum och högt tryck, men kraften är stor och den måste installeras horisontellt .
Den övre gränsen för fluidtrycksområdet är hög, som kan installeras godtyckligt (måste anpassas) men måste uppfylla vätskepressens differentiella förhållanden .
Princip
There is a closed cavity in the pneumatic solenoid valve, and there are through holes in different positions. Each hole of the pneumatic solenoid valve leads to a different trachea. The middle of the cavity is a valve, and the two sides are two electromagnets. Which side will the valve body be attracted to;
The pneumatic solenoid valve blocks or leaks different exhaust holes by controlling the movement of the valve body, and the intake holes are normally open, and the high-pressure gas will enter different exhaust pipes, and then be pushed by the air pressure of the pneumatic solenoid valve. The piston of the cylinder, so that the current through the electromagnet that controls the pneumatic solenoid valve styr den mekaniska rörelsen för hela magnetventilen .
Arbetsprincipen för den pneumatiska magnetventilen
När vi pratar om arbetsläget för den pneumatiska magnetventilen (magnetventilen är på eller av), hänvisar den faktiskt till positionen för ventilkärnan i den pneumatiska magnetventilen .
The spool is in the A position when the coil is de-energized and in the B position when the coil is energized. When the valve cores of the pneumatic solenoid valve are in different positions, the ports on the valve body can be turned on or off. For example, a two-position solenoid valve means that the spool of the solenoid valve has two different working positions (open eller stängt) . Det är öppningen och stängningen av ventilen . Tvåvägs- och trevägs solenoidventiler hänvisar till två eller tre passage-portar på ventilens kropp av de pneumatiska solenoidventilen . Tvåpositionens tvåvägssolenoid har två kanal, en i och en i och en i och är den mest beniga pneinen; Tvåpositionens trevägs magnetventil har tre kanaler, en in och två ut, och de två utkanalerna motsvarar anslutningar är normalt öppna och normalt stängda . på liknande sätt, treväg, fyrväg och femvägs hänvisar också till antalet vätskepassager på ventilkroppen.}}}}}}}}}
